Height Comparison Chart

Compare heights. See the difference. Save your chart.

One shared scale

Your people

2 / 10

Example heights — edit either person.

Person 1
•••
Person 2
•••
HEIGHT DIFFERENCE10 cm / 3.94 in

Person 2 is 10 cm (3.94 in) taller than Person 1.

Height comparison chartHeight comparison chartcmin005019.710039.415059.120078.7Person 1170 cm5 ft 6.9 inPerson 2180 cm5 ft 10.9 inPerson 2 is 10 cm (3.94 in) taller than Person 1.One shared scale · Figures are illustrative, not body measurements.heightcomparison.dev

Heights as text
  • Person 1: 170 cm · 5 ft 6.9 in
  • Person 2: 180 cm · 5 ft 10.9 in

Saved on this device only.

Height Difference Calculator

Choose two people in the chart to see who is taller and the difference in centimeters and inches. You can mix centimeters with feet and inches; both heights are converted to the same unit before the difference is calculated.

A mixed-unit example

5 ft 4 in equals 162.56 cm. 6 ft equals 182.88 cm. The height difference is |182.88 − 162.56| = 20.32 cm, or exactly 8 inches. The chart uses the same scale for both figures.

With more than two people, choose any two using the comparison selectors. You can reorder the lineup without changing a person’s height.

A height difference is an absolute distance between two measurements. If one person is 170 cm and another is 180 cm, the gap is 10 cm in either order. The sentence identifies the taller person; reversing the selected pair does not turn the gap into a different measurement. For a group, select the pair you want to discuss rather than assuming the first and last figures are always the comparison. Use Tallest first to arrange the lineup, then check the selected names beside the result. Colors and figure outlines help you follow people across the chart without changing the calculation.

Character Height Comparison

Switch to Original characters to build a lineup from heights you choose. The starting Scout, Keeper, and Giant are original examples at 170, 185, and 220 cm. Edit their names, heights, colors, and outlines or add more characters, up to 10.

Character mode supports 1 cm to 1,000 meters. Every character still uses one scale. A very small character will look small next to a giant; the chart does not enlarge that character separately. The site does not supply celebrity measurements, fictional character records, or character artwork.

Build a character lineup from a consistent set of measurements. For example, a 2-meter character is twice as tall as a 1-meter character, whether you enter those heights in meters or centimeters. When the tallest figure changes, the scale adjusts for the entire group. A human-sized figure beside a very large creature may become difficult to see at screen size; read the labeled height to keep the exact measurement in view. Switch back to Compare people when your lineup fits the ordinary human-height range.

Make a chart you can take with you

1. Enter heights

Start with two editable examples. Use centimeters or feet and inches for people, with a separate unit choice for each row. Names are optional. The chart updates when an entry is valid; an incomplete edit keeps the previous chart visible and pauses exports until you correct it.

2. Compare the figures

All figures start at zero on the same ground line. The figures are original illustrations, so their width and shape do not predict a real person’s body proportions. Use the text results as another way to read the heights.

3. Save, share, or print

Download PNG includes the complete lineup, even when you scroll sideways to see it on a phone. A share link contains the names and heights you entered, and anyone with the link can view them. Print / PDF uses your browser’s print dialog; choose A4 or Letter, preferably in landscape.

The tools save the last comparison on this device when browser storage is available. Clear the saved comparison in the tool whenever you want to start fresh.

Opening a shared chart gives you a preview before replacing a saved comparison. Check the people and heights, then choose to use that chart if it is the one you want to edit. A downloaded PNG is a picture of the current lineup; the shared link carries the editable measurements instead. Before sending either, replace any names you would prefer to keep private. Saving a chart on one device does not automatically move it to another browser.

Chart accuracy and rounding

One inch is exactly 2.54 cm and one foot is 12 inches. A height is kept separately from its displayed value, so switching units does not repeatedly round the calculation. Centimeters are normally displayed to two decimal places and feet & inches to 0.1 inch. A tiny positive difference is shown as a small amount rather than being called the same height.

Feet and inches are separate parts of a height. Five and a half feet means 5 feet 6 inches, because half of a foot is 6 inches. Enter 5 in Feet and 6 in Inches; entering 5 feet 5 inches gives a shorter height. If your source gives one total in inches, the height converter can show its feet-and-inches form before you add it to a comparison.

The chart compares the measurements you provide. It is not a height prediction, a health assessment, a photograph, or a life-size measuring sheet.

Need one height in another unit? Open the height converter for centimeters, meters, feet and inches, total inches, formulas, and a reference table. Height comparison guides are available from the Blog.

Height comparison questions

Can I compare heights in both cm and feet?

Yes. Each person has their own unit setting. A 170 cm entry and a 6 ft entry can share the same height comparison chart. You can switch a row’s unit to read the equivalent height while the chart keeps the same underlying measurement and shared scale.

How many people can I compare?

You can build a lineup of up to 10 people or original characters. One height can stand alone, but the difference calculator needs a second person. For a larger group, use the two comparison selectors to choose which pair supplies the text result.

Does sharing upload my chart?

The link carries the comparison in its # fragment. It does not create a server-side share record. Anyone with that complete link can restore and edit the comparison. Remove private names before sharing, and keep the complete link so the receiving browser can read its heights.

Can I print it at actual size?

Print and PDF show a proportional comparison, not a 1:1 measuring sheet. Use a real measuring tool when you need someone’s physical height. For a readable chart, choose landscape A4 or Letter and check your browser’s preview before printing or saving the PDF.

Can I use my own character heights?

Yes. Original characters mode accepts your own names and measurements. It does not look up a character’s canonical height or provide copyrighted character images. Choose the heights for your story or design, then compare the original figures using the same scale as the rest of the lineup.

Back to the chart.