Guides

How to Read Decimals of a Foot in Height Measurements

Understand decimals of a foot: why 5.5 feet means 5 feet 6 inches, how to convert fractional feet to inches, and what rounding changes.

Height Comparison
On this page

Decimal-foot height measurements express heights in feet with a decimal that denotes the fraction of one foot. The decimal notation includes the whole number of feet and then, as an additional decimal digit, the fraction of one foot. That is, “5.10 feet” would be five feet plus one tenth of a foot. One foot equals 12 inches, so one tenth of a foot would be 1.2 inches (1/10 of 12).

You may have seen decimals used to indicate the exact fractional inch equivalent for the portion of the foot you’re not considering. For instance, the 12 inches in a foot can be expressed as 1 foot or 1.000 feet, while 11 inches is approximately 0.917 feet. You’ll need to remember that when converting between inches and feet.

If we take “5.5 feet,” that’s 5 feet and 6 inches, because 0.5 of a foot is half of a foot (6 inches). But if you write 5.10 feet, you are saying 5 feet and 1.2 inches, not 5 feet and 10 inches. Because 5.10 feet = 5.1 feet, it’s 5 feet and 1.2 inches.

Convert Inches Into Decimal Feet

The easiest way to convert mixed fractions into decimal feet is first to consider the mixed fractional inches as a single numerical value. So, for example, 5 feet and 3 inches can be considered as the number 5.25, which is 5 feet plus 3 inches (since 3 inches equals 0.25 of a foot).

But you don’t necessarily have to treat this like a normal math problem. Instead, treat the remaining inches (the fractional part) as separate from the whole number. So, let’s say you have 5 feet and 3 inches. In this case, the total inches is 63 inches. But we only care about the inches after the feet, which is 3 inches.

We can use that formula to find out how many decimal feet we are talking about. Remaining inches ÷ 12 inches per foot = decimal feet. That is, the number of inches remaining (3 inches in our example) divided by 12 inches per foot gives us the number of feet: 3 / 12 = 0.25 feet. So, 5 feet and 3 inches is 5.25 feet.

One foot divided into twelve equal inches, with six inches bracketed as half a foot.

Convert Decimal Feet to Feet and Inches

You can also do the conversion the other way around: Convert decimal feet to feet/inches. In that case, the formula is decimal feet × 12 = inches, but only for the fractional part. The whole feet remain the same.

For example, 5.25 feet is equal to 5 feet plus (0.25 feet × 12) = 3 inches. Therefore, 5.25 feet = 5 feet and 3 inches.

Let’s look at another example: 1 1/8 inches. This can be rewritten as 1.125 inches. Divide that by 12 to get the decimal equivalent of 0.09375 feet.

If you want to do the calculation manually, feel free to follow along.

Whole-inch reference

This compact table shows what the decimal equivalent of any whole inch is, both as a fractional foot and as a decimal value, rounded consistently to three places. It distinguishes exact quarter-foot increments (where the decimal terminates) from repeating decimals, where you see the ellipsis notation.

Inches Fractional foot Decimal feet Rounded to three places
1 1/12 0.083333… 0.083
2 1/6 0.166666… 0.167
3 1/4 0.25 0.250
4 1/3 0.333333… 0.333
5 5/12 0.416666… 0.417
6 1/2 0.5 0.500
7 7/12 0.583333… 0.583
8 2/3 0.666666… 0.667
9 3/4 0.75 0.750
10 5/6 0.833333… 0.833
11 11/12 0.916666… 0.917
12 1 1 1.000

Decimal Places and Rounding Error

There are two things you should notice about this scale:

Tenths and hundredths tell us the rounding increment, but don’t establish how precisely the measurement was taken. For instance, rounding to the nearest tenth of a foot gives a maximum rounding error of 0.6 inch (half of 1.2 inches), while rounding to the nearest hundredth of a foot gives a maximum rounding error of 0.06 inch. At three decimal places, the maximum rounding error is 0.006 inch; at four, it’s 0.0006 inch. You can find each by taking half of the last decimal place and multiplying by 12. For example, 1/8 inch is exactly 1/96 of a foot, or 0.0104166… feet. Rounded to two decimal places, that’s approximately 0.01 foot.

These numbers are displayed to three decimal places, even though there are four different ways to represent them, each to varying degrees of precision. What they all show is that you can’t know exactly how precise the original measurement was just by looking at how many decimal places were displayed.

Sources

Try the height tools

Compare two to ten people or convert a height precisely.

Compare heights →Height converter →